Bead blasting is a mechanical process which is used to remove the deposits on the surface of a material by applying very fine beads of glass at high pressures. The process is done in such a way that the surface is not damaged. Bead blasting systems are basically used to remove and clean calcium deposits from surfaces like pool tiles. Bead blasting also removes fungus which is embedded in the surface and also in auto body parts to remove paint. Bead blasting is a method of abrasive blasting. Abrasive blasting is the general method of forcing abrasive material against a surface at high pressures to remove unwanted contaminants, smooth a rough surface or roughen a smooth surface and shape a surface. Equipments used for abrasive blasting are blast cabinet or a portable blast equipment and blast room. The bead blasting equipment includes portable pressure blast equipment for cleaning, peening, finishing and removing coatings. The equipment is available in a range of configurations and sizes designed for safety, increased productivity, ease of operation and reduced maintenance.
Shot blasting is a method similar to abrasive blasting. It is a method which is used to polish, strengthen or clean a metal surface. Shot blasting in North California is used in nearly every industry. Automotive, aerospace, foundry, construction, rail and shipbuilding are some of the industries in which the process of shot blasting is used extensively. There are two ways in which shot blasting is done, namely air blasting and wheel blasting. These processes involve the use of electric energy in the case of wheel blasting and an air blast in the case of air blasting.
The process of bead blasting and shot blasting are also important while repairing cracks and joints. In crack and joint repair, the material has to be cleaned where the crack has formed before repairing it. This is where these processes come in. Thus, it is obvious that these processes are very important in a lot of industries.
There are a lot of industries offering services for bead blasting in North California. If you are looking to buy equipment to setup a factory or industry or whether you want the material to undergo bead blasting in a factory already set-up, both options are available easily now-a-days. The equipment can be of various types depending on the size and exact process you require; from fully automatic machines for automotive manufacturers to simple or integrated table machines, there is a wide variety of ISO certified equipment.
A lot of research has gone into the processes of abrasive blasting. The result of this research is that we have improved the speed and efficiency with which these processes are carried out. There have been significant changes in the way these processes are now carried out. Earlier it was assumed that sharp-edged grains gave the best performance but studies later showed that it is not true. The safety standards while operating the equipments have also risen as there is considerable risk to the workers.